Viewed products

SYS-6026TT-BIBXF

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s2. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Dedicated LAN5. Mellanox ConnectX DDR Infiniband
20Gbps Controller w/ QSFP connector

Plus de détails

14 other products in the same category:

En savoir plus
Commentaires (0)

4 Integrated Boards

Super X8DTT-IBXF

Key Features
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s2. Up to 192GB** DDR3 1333/ 1066/
800MHz ECC Registered DIMM / 48GB
Unbuffered DIMM3. 1 (x16) PCI-E ( Low Profile)4. Integrated IPMI 2.0 with KVM and
Dedicated LAN5. Mellanox ConnectX DDR Infiniband
20Gbps Controller w/ QSFP connector6. Intel® 82576 Dual-Port Gigabit
Ethernet Controller7. 3x Hot-swap SATA Drive Bays8. 1400W Gold-level High-efficiency
Power Supply

Available Colors:

Black

Drivers & Utilities

BIOS

Manuals

Tested Memory List

Tested HDD List


Product SKUs

SYS-6026TT-BIBXF	SuperServer 6026TT-BIBXF (Black)


Motherboard

4x Super X8DTT-IBXF


Processor/Cache

CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI	up to 6.4 GT/s


System Memory

Memory Capacity	12x 240-pin DIMM sockets Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)


On-Board Devices (per Node)

Infiniband	Mellanox ConnectX DDR Infiniband 20Gbps Controller
Chipset	Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond® WPCM450 BMC
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW
Super I/O	Winbond W83527HG chip
Clock Generator	932S421 chip


Input / Output (per Node)

Serial ATA	Six Serial ATA ports 3 SATA hard drives supported
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2 rear + 1 header (2 Ports) 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Serial Port	1 Fast UART 16550 serial port
Infiniband	1 External QSFP Infiniband Connector


System BIOS (per Node)

BIOS Type	32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support


Chassis

Form Factor	2U Rackmount
Model	CSE-827H-R1400B


Dimensions

Height	3.5" (89mm)
Width	17.2" (437mm)
Depth	28.5" (724mm)
Gross Weight	85 lbs (38.6kg)
Available Colors	Black


Front Panel (per Node)

Buttons	Power On/Off button UID button
LEDs	Power LED (on power button) UID LED (on UID button) Network activity LED System Overheat/fan fail/power fail/ LED


Expansion Slots (per Node)

PCI-Express	1 (x16) PCI-E ( Low Profile)


Drive Bays (per Node)

Hot-swap	3x 3.5" SATA Hot-swap drive bays


Hard drive Backplane

2U Hard drive Backplane


System Cooling

Fans	4x Cooling Fans


Power Supply

1400W high-efficiency (1+1) redundant power supply with PMBus
AC Input	1100W: 100 - 140V, 50 - 60Hz, 9.5 - 13.5 Amp 1400W: 180 - 240V, 50 - 60Hz, 7.0 - 9.5 Amp
DC Output +5V standby	4 Amp
DC Output +12V	92 Amp @ 100-140V 116 Amp @ 180-240V
With Distributor	+5V: 30 Amp +3.3V: 24 Amp -12V: 0.6 Amp
Certification	80 PLUS Gold Certified [ Test Report ]


PC Health Monitoring

CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator
FAN	Total of four 4-pin PWM fans 4x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 4x Fan Connectors PSU I²C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support


Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°to 35°C (50°to 95°F) Non-operating Temperature: -40°to 70°C (-40°to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing)


Parts List - (Items Included)

	Part Number	Qty	Description
Motherboard / Chassis	MBD-X8DTT-IBXF CSE-827H-R1400B	4 1	Super X8DTT-IBXF Motherboard 2U Black Chassis
Air Shroud	MCP-310-82706-0B	4	2U Air Shroud
Adapter	BPN-827ADP-X8	4	Hot-swap adapter
Backplane	BPN-827ADP-X8	4	BPN-SASADPûSAS827-X8DTT;cable req
Backplane	BPN-SAS-827B	1	Sup 12x3.5ö SAS/SATA HDD;hot swap
Cable 1	CBL-0317L	4	SATA SET OF 3-17/20S-S/20S-RA CM ROUND (2U Twin^2 Hot Swap)
Cable 2	CBL-0318L	4	FRONT CTRL CABLE ROUND 16 TO 16 PIN RIBBON 27CM
Cable 3	CBL-0319L	4	2 PIN TO 2 PIN CABLE, 5CM
Cable 4	CBL-0320L	4	4 PIN FAN CABLE FOR 2U TWIN SERVER (15+18 CM)
Cable 5	CBL-0321L	4	4PIN TO 4PIN I2C CABLE, 17CM
CD	CDR-X8	1	For X8 series
Riser Card	RSC-R1U-E16R	4	RSC-R1U-E16R
Heatsink / Retention	SNK-P0037P	8	1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Power Supply	PWS-1K41P-1R	1	1400W 1U GOLD LEVEL PWS W/ PM BUS & WX3"
Drive Tray(s)	MCP-220-00075-0B	12	Black gen 5.5 hot-swap 3.5" HDD tray (w/ hollowed dummy)