DGP-3106t Industrial 6-port Gigabit IEEE802.3af/at PoE Switch Maximize

DGP-3106t Industrial 6-port Gigabit IEEE802.3af/at PoE Switch

  • 4-Port IEEE 802.3af/ 802.3at PSE
  • 1 100Mbps/1000Mbps SFP Fiber Uplink port
  • 1 1000Mbps RJ-45 Uplink port
  • 110Watts PoE output ability
  • Embedded DC 48V Booster
  • DC 12~36V Input
  • 9KB Jumbo frame support ....

Plus de détails

DGP-3106t

  • Technology
    Standards:
    IEEE 802.3 10Base-T
    IEEE 802.3u 100Base-TX
    IEEE 802.3u 100Base-FX
    IEEE 802.3ab 1000Base-T
    IEEE 802.3z Gigabit Ethernet Fiber
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at High Power PoE with 2-Event classification
    IEEE 802.3x flow control and back-pressure
    Performance
    Switch MAC Table: 2K MAC address
    Packet Buffer: 1Mbits embedded
    Switching architecture: Store and Forward technology
    Forwarding frame size: 64bytes ~ 9Kbytes jumbo frame
    System throughput:
    10Mbps -14880 PPS
    100Mbps-148800 PPS
    1000Mbps -1488000 PPS
    PPS:packet per second, 64Bytes packet length
    Interface
    Gigabit Ethernet RJ-45: 5 x 1000Mbps RJ-45 with Auto MDI/
    MDI-X, auto negotiation and port event function, embedded 4
    x IEEE 802.3af/IEEE 802.3at compliance PSE
    ports (Port #1~#4), Alternative –A mode powering
    SFP Socket: 1 x SFP socket for Gigabit 1000Mbps SFP or
    Fast Ethernet 100Mbps SFP transceiver. Manual selected and
    activate by DIP-Switch and power reset.
    Power: Redundant Power input with polarity protection;
    designed in 6-pin removable terminal block connector.
    Alarm relay output: 1 dry relay output, designed in 6-pin
    removable terminal block connector. Normal open circuit.
    Cable: 100Base-TX: 2-pairs EIA/TIA 568-B UTP/STP Cat.5e/
    Cat.6 cable
    1000Base-T: 4-pairs EIA/TIA 568-B UTP/STP Cat.5e/ Cat.6
    cable
    Alarm control: Ethernet port (1~6) link down and power event
    alarm, configure by 6-pin DIP switch.
    Relay output ability: Dry Output with 0.5 A current forwarding
    ability with DC 24V external power system.
    Relay output Type: Normal state (Alarm off) - relay output
    form an open circuit
    Abnormal state (Alarm on) – relay output form a close circuit
    Diagnostic LEDs: System: Power 1 (Green)/ Power 2 (Green),
    Alarm Active (Red)
    Ethernet Link/Activity (Green on/ Green Blinking),
    PoE powering (Amber on), SFP port: Link (Green on)
    Power over Ethernet
    PoE interface: Gigabit Ethernet port 1 ~ 4
    Power forwarding Mode: Alternative- A (Data Pair Power
    feeding): Port 1~4 , V+ (3,6) V- (1,2)
    PoE Classification Model: IEEE 802.3af and IEEE 802.3at
    2-Event
    PoE Powering Budget: 30W PoE Output for each port,
    System Maximum PoE Output
    DC24V, 90W/ 75°C /95% Humidity
    DC24V, 110W/ 65°C /95% Humidity
    DC12V, 60W/ 70°C /95% Humidity
    System Inrush Current:
    DC 12V / 7.6A, DC 24V/6.1A
    Power Requirements
    System power: Power input: DC 12V or DC 24V, variation
    range DC12~36V
    Polarity Protection and Over-Current protection
    Power consumption: 10 Watts / DC 24V at 75°C ambient
    environment without PoE Loading.
    Mechanical
    Installation: EN50022 DIN rail Snap-On mounting
    Case: Steel Metal Housing with Ingress protection
    grade - IP30
    Real / Bottom side panel with heat-dissipation holes.
    Dimension : 144mm (H) x 55 mm (W) x 105mm (D)
    ( without DIN rail Clip)
    Weight: 0.8 Kg without package
    Environment
    Operating temperature: -40~75°C
    Operating Humidity: 0~95%
    Storage temperature: -40~80°C
    Storage humidity: 0~95%
    Regulatory & Approvals
    Electrical Safety: Compliance to IEC 60950-1, UL 60950-1
    Hi-pot DC 2.12KV for Power port to Case, Ethernet Port to
    Case
    EMC/ EMI: IEC/EN 61000-6-4, CISPR 16-1-2/ -2-1/-2-3,
    CISPR 22, FCC Class A, CE
    EMC/ EMS: IEC/EN 61000-6-2
    IEC 61000-4-2 ESD: Contact 6KV / Air Con. 8KV
    IEC 61000-4-3 RS: 80M~1Ghz /20V, 1.4~2Ghz/3V,
    2~2.7Ghz /1V
    IEC 61000-4-4 EFT: L-L/L-N 2KV, Signal 2KV
    IEC 61000-4-5 Surge: L-L/1KV, L-N/2KV, Signal I/O 1KV
    IEC 61000-4-6 CS: 0.15M~80Mhz / 10V
    IEC 61000-4-8 PFMF: 30A/m Cont. 300A/m 1~3S.
    Anti-Vibration/Anti-Shock: IEC /EN 60068-2-6 vibration:
    10~150Hz, 20m/s2 (2.04g), 20 sweeps / per axis.
    IEC /EN 60068-2-27 shock: 50g acceleration, 11ms
    duration, Half –Sine wave.
  • 4-Port IEEE 802.3af/ 802.3at PSE
  • 1 100Mbps/1000Mbps SFP Fiber Uplink port
  • 1 1000Mbps RJ-45 Uplink port
  • 110Watts PoE output ability
  • Embedded DC 48V Booster
  • DC 12~36V Input
  • 9KB Jumbo frame support
  • Mega Pixel IP surveillance network solution
  • User configurable Multiple-Event Alarm Relay Output
  • IP30 Rugged Steel Metal Housing design
  • Harsh Environment Temperature -40~75°C

The DGP-3106t is a rugged entry-level industrial grade Gigabit PoE Ethernet Switch that supports 4-ports Gigabit RJ-45 with High Power feeding ability- Power-over-Ethernet, 1-port Gigabit RJ-45, and 1 SFP socket for 100Mbps or 1000Mbps Fiber connection. The 4 PoE ports support IEEE 802.3at and IEEE 802.3af for 30Watts and 15Watts Power-over-Ethernet application. It also compliance the IEEE standards- IEEE 802.3/ 802.3u/ 802.3ab/ 802.3z standards and supports several link speeds and modes.

Embedded DC Boosting for Vehicle / PV IP surveillance
The Power over Ethernet technology is commonly in the IP surveillance applications. Most of applications need to install DC 48V for Power Source Equipment (Ethernet Switch with PSE), and it is easy to obtain in residential building, but difficult from vehicle. The DGP-3106t embedded DC booster to solve the lack of 48V issue. It accepts DC power from Vehicle or Photovoltaic (PV) DC battery (12V or 24V), then boosting voltage up to 48V, and offers PoE system power budget up to 110W in 75°C ambient temperature. The DGP-3106t also can work at harsh environment with -40°C~75°C wide operating temperature.

Enlarge Networking Connection
DGP-3106t provides 2 Gigabit ports uplink which are 1 Gigabit Ethernet RJ-45 and SFP port for 100Mbps or 1000Mbps Fiber Transceiver. Both of interfaces are working independent. Therefore, the DGP-3106t can offer high speed connection through Ethernet copper, or through the multi-mode or single-mode fiber for extra –long distance connection.

Entry Level, Hi-Performance, Power Over Ethernet Solution
The 6-port Gigabit Power over Ethernet solution – DGP-3106t is designed and aimed to special vertical market– IP surveillance on vehicle or where it lacks of DC 48V. The 14Gbps high speed fabric and large frame forwarding ability as well as offers better performance for the Mega Pixel cameras. Therefore, the DGP-3106t is the best choice of Entry-Level Gigabit Power over Ethernet Switch which with significant benefits of cost effective, high performance, connective flexibility and easy installation.

Dimension (Unit=mm) : 140 (H) x 55 (W) x 105 (D) / without DIN Rail Clip



DGP-3106t 

Aucun commentaire n'a été publié pour le moment.

Donner votre avis

DGP-3106t Industrial 6-port Gigabit IEEE802.3af/at PoE Switch

DGP-3106t Industrial 6-port Gigabit IEEE802.3af/at PoE Switch

  • 4-Port IEEE 802.3af/ 802.3at PSE
  • 1 100Mbps/1000Mbps SFP Fiber Uplink port
  • 1 1000Mbps RJ-45 Uplink port
  • 110Watts PoE output ability
  • Embedded DC 48V Booster
  • DC 12~36V Input
  • 9KB Jumbo frame support ....

Donner votre avis