IWGP-2N20 Industrial Dual 802.11n 2.4G/5G 2T2R MIMO Wireless AP Maximize

IWGP-2N20 Industrial Dual 802.11n 2.4G/5G 2T2R MIMO Wireless AP

  • Dual Radio Configurable: 802.11 a/b/g/n and 2.4G/5G Band
  • 802.11n 2T2R MIMO doubles data rate up to 300Mbps per radio
  • Rugged M12 anti-vibration connector for vehicle installation(IWGP-2N20m)
  • LAN/Wireless Link Fault Pass-Through
  • Dual Radio Bridge and Redundancy
  • LAN/WAN/WIFI Bridging and Routing .....

Plus de détails

IWGP-2N20

Technology
Standard
Wireless:
IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i Wireless Security
Ethernet:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 10/100Base-TX
IEEE 802.3ab for 1000BaseT
IEEE 802.3at for Power over Ethernet plus
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1Q for VLAN
Highest Data Rate:
IEEE 802.11a, g: 54 Mbps
IEEE 802.11n: 300Mbps @ 40MHz
Interface
Ethernet Port
2x 10/100/1000Base-T RJ-45 (IWGP-2N20) 
2x 10/100/1000Base-T M12 (IWGP-2N20m)
IEEE 802.3at PoE+ Complaint in Ethernet Port 1
Power Input
4-pin socket for Dual DC Input
Digital Input/ Output
1x Digital Input, 0: +3V max., 1: +11V~+30VDC 
1x Relay Output, 1A@24VDC
Console
3-pin Diag. socket for Diagnostic/CLI
Reset
Reset Factory Default after press 7 seconds
Antenna Socket: MA Reverse type sockets for WIFI (2x2), Nylok pre-applied
Performance
CPU: 680MHz
Memory: 16MB Flash, 64MB SDRAM
Operating Frequency
5GHz Typical Band: (802.11n WIFI) 
FCC: 5.170~5.250GHz, 5.735~5.835GHz 
CE: 5.170~5.250GHz 
(Programmable for other 5G Band) 
2.4GHz Band: (802.11n WIFI) 
FCC : 2.412~2.462GHz 
CE : 2.412~2.472GHz 
(Programmable for different country regulations)
RF Modulation
802.11a/n: OFDM (BPSK, QPSK, 16-QAM, 64QAM) 
802.11g/n: OFDM (BPSK,QPSK,16-QAM,64QAM)
RF Output Power (Max. of Avg.)
5.8GHz Band: 
21dBm@ 802.11a/n HT20 (MCS0/8, 5180MHz) for FCC 
23dB EIRP for ETSI 301 893 (Band 1) 
25dB EIRP for ETSI 301 893 (Band 4) 
2.4GHz Band: 
21dBm at 802.11g/n HT40 (MCS0/8, 2422MHz) for FCC 
20dB EIRP for CE (ETSI 300 328) 
(Controllable for different country regulations)
Sensitivity
802.11a: 
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx; 
-65dBm@54Mbps,1Rx; -79/-75dBm@54Mbps, 2Rx; 
802.11g: 
-82dBm@6Mbps,1Rx; -95/-91dBm@6Mbps,2Rx; 
-65dBm@54Mbps,1Rx; -80/-76dBm@54Mbps,2Rx 
802.11a/n HT20: 
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx; 
-64dBm@MCS7,1Rx; -77/-73dBm@MCS15,2Rx 
802.11a/n HT40: 
-79dBm@MCS0,1Rx; -91/-87dBm@MCS8,2Rx; 
-61dBm@MCS7,1Rx;-74/-70dBm@MCS15,2Rx 
802.11g/n HT20: 
-82dBm@MCS0,1Rx; -95/-91dBm@MCS8,2Rx; 
-64dBm@MCS7,1Rx;-77/-73dBm@MCS15,2Rx 
802.11g/n HT40: 
-79dBm@MCS0,1Rx; -90/-86dBm@MCS8,2Rx; 
-61dBm@MCS7,1Rx;-74/-71dBm@MCS15,2Rx
Power Requirements
Power
Ethernet 1: IEEE802.3at PoE+ compliant 
Cables: 2/4-pair UTP/STP Cat. 5E cable (100m)
DC Input: Dual 24V (12~48VDC) input
Power Consumption
Max. 10 Watts @ DC 48V, depend on Radio TX power
Default WIFI Antenna Characteristics
Gain
Default Antenna 5G 3.57dBi, 2.4G 2.63dBi,
Frequency
Available for 5G/2.4G band
Direction
Omni-Antenna
Material
Fiberglass
Management
Management
Web GUI, HoneMaster Utility, SNMP, NTP, IP Setup, DHCP Server/Client, Management VLAN, Configuration Backup/Restore, Reload Default
Operating Mode
System: Bridge or Router
Wireless: 
Wireless Access Point, Wireless Client
WDS-AP, WDS-Client
Redundant AP, Redundant Client for wireless redundancy
Radio
Radio Bandwidth Control, Output power, Antenna number, Distance in Meter
WLAN Setup
Multiple SSID, Radio On/Off, SSID Broadcast, Frequency/Channel Select, Data Rate, VLAN ID, Advanced Settings, Maximum Client number, Client Based Fast Roaming <100ms
Link Integration
Wire and Wireless Link Fault  Pass-Through
WMM: WMM QoS
Traffic Shaping: Incoming/Outgoing Traffic Limit
Router: Static, DHCP, LAN/WAN IP, IP/Port Filtering
STP: Support Spanning Tree Protocol
SNMP: Simple Network Management Protocol v1/v2c/v3, Function-based MIB
MIB: Function-based Management Information Base for SNMP Management
Status: Wireless Status, Associated client, Ping, Site Survey, Ping Watchdog
Link Test: Antenna Alignment Tool, Data Rate Test
SNMP Trap: SNMP Trap to specific server
SMTP: E-mail Alert
System Log: System events log
Security: 
Security
Multi-SSID (up to 8x ESSID for each radio)
Secured Access
HTTPS, SSH, IEEE 802.1X, MAC Address ACL
Firewall
Firewall for IP/MAC filtering
DMZ, Port forwarding
Security Encryption
WEP 64/128 bits, WPA-PSK(TKIP), WPA2-PSK/EAP (IEEE 802.1x/RADIUS, TKIP and AES)
Mechanical
Enclosure
IP31 protection
Antenna connector:Reverse SMA 
Mounting: Din-Rail, Wall-Mount, Celling-Mount (Option Accessory)
Dimension: 149 mm(H) x 120.6 mm(D) x 74 mm(W)
Weight: 1.5 kg with package, without optional accessary
Environmental
Operating
Temperature: -40 ~70°C 
Humidity: 5% ~ 95% (operating)
Storage
Temperature: -40 ~ 85°C 
Regulatory Approvals
EMC
CE EN55022/24, 
FCC part 15B Class A Railway
Railway
Railway Roadside EN50121-4 EMC Certification
Safety
EN60950-1
Radio
EN 300 328 V1.8.1
EN 301 893 V1.7.1
EN301 489-1/17(WIFI)/24(3G)
EN301908-1
Option Accessory
Celling Mounting
Celling Mounting Plate, Used for Celling-/Wall-mounting, Dimension: 156x117x22mm
External Antenna Mounting Kit
Antenna Mounting L Plate 
Extended Radio Cable: RG316 Cable, L=90cm, SMA Male Reverse to SMA Female Reverse

 

  • Dual Radio Configurable: 802.11 a/b/g/n and 2.4G/5G Band
  • 802.11n 2T2R MIMO doubles data rate up to 300Mbps per radio
  • Rugged M12 anti-vibration connector for vehicle installation(IWGP-2N20m)
  • LAN/Wireless Link Fault Pass-Through
  • Dual Radio Bridge and Redundancy
  • LAN/WAN/WIFI Bridging and Routing
  • SNMP, Function-based MIB, Korenix View Utility, Korenix NMS for remote Management
  • Industrial IP31 Aluminum Housing
  • Gigabit PoE+ power input
  • DC24V(12~48V) Redundant DC Power Input, DI + DO
  • EN50121-4, -40~70°C operating temp.
  • IWGP-2N20: Dual 802.11n 2.4G/5G 2T2R MIMO Radio with Dual Gigabit Ethernet
  • IWGP-2N20m: Dual 802.11n 2.4G/5G 2T2R MIMO Radio with Dual Gigabit Ethernet  M12 Connector


The IWGP-2N20 series is an industrial 802.11n/ a/b/g Wireless AP which offers a high performance and reliability wireless solution for both 2.4G and 5G radio band. With the IWGP-2N20 series wireless access point, a network designer will easily achieve the integration of wired and wireless networks. 
With the new generation 802.11n MIMO technology, the multi-radio offers a high data rate of up to 300Mbps per radio, provide flexible wireless backbone deployment options, and provide the redundant wireless connections to increase the reliability of the entire wireless network. The IWGP-2N20m equips with dual Gigabit Ethernet M12 anti-vibration connector for vehicle installation.

The IWGP-2N20 series can function as an AP/CPE, WDS modes for different point to point or point to multiple point network applications. The additional Routing mode allows to separate the LAN and WLAN to different IP subnet, and perform NAT routing. The advanced features include LAN to WLAN Link Fault Pass-Through, Dual Radio Bridging and Redundancy, high speed gigabit Ethernet transmission, Wireless QoS (WMM) and complete wireless security and packet encryption.

The IWGP-2N20 series is an industrial grade design with the significant features of gigabit PoE+, dual 24V(12~48V)DC power input, IP31 Housing and Digital Input/Output. The design of the EN50121-4 approved and wide operation temperature design allows users to install the device under harsh environmental conditions.

Wireless Redundancy

IWGP-2N20 supports two Wifi interfaces that can be configured as 802.11a/g/n and 2.4/5G band. By connecting the two Wifi interfaces to the same peer, the two links backup with each other. Users can assign primary link on one interface and backup link on the other.



Bidirectional 

Link Fault Pass-Through 
The link loss condition of wireless connection is detected and passed to both ends of the physical links. Link Fault Pass Through helps to notify the end devices and administrators to take actions to minimize the down time.

Rugged M12 Connector

The anti-vibration, anti-shock M12 connectors secure the link reliability on bus, trains or other moving vehicles, which is an ideal wireless solution for transportation markets.


Dimension





Aucun commentaire n'a été publié pour le moment.

Donner votre avis

IWGP-2N20 Industrial Dual 802.11n 2.4G/5G 2T2R MIMO Wireless AP

IWGP-2N20 Industrial Dual 802.11n 2.4G/5G 2T2R MIMO Wireless AP

  • Dual Radio Configurable: 802.11 a/b/g/n and 2.4G/5G Band
  • 802.11n 2T2R MIMO doubles data rate up to 300Mbps per radio
  • Rugged M12 anti-vibration connector for vehicle installation(IWGP-2N20m)
  • LAN/Wireless Link Fault Pass-Through
  • Dual Radio Bridge and Redundancy
  • LAN/WAN/WIFI Bridging and Routing .....

Donner votre avis