Alimentation Zippy 1 U DM1W4-6D50F?1350W? Maximize

Alimentation Zippy 1 U DM1W4-6D50F?1350W?

Dimension?340.00x422.00x43.00  (mm)

/ 13.40x16.60x1.70  (inch)

Input??VOLTAGE: DC –36 ~ -72V
?INPUT CURRENT: 40A (RMS) FOR -48 VDC
?INRUSH CURRENT: 20A MAX.

Plus de détails

?VOLTAGE: DC –36 ~ -72V
?INPUT CURRENT: 40A (RMS) FOR -48 VDC
?INRUSH CURRENT: 20A MAX.

 

Output VoltageOutput Current Min.Output Current Max.Output Current PeakRegulation LoadRegulation LineOutput Ripple & Noise Max.[P-P]
+5V3.575.00±5%±50mV70mV

 

-5V0.051.2+5/-10%±50mV120mV

 

+12V290±6%±50mV120mV

 

-12V0.051.2+5/-10%±50mV120mV

 

+3.3V167.5±5%±50mV70mV

 

+5VSB0.13.5+5/-6%±50mV70mV

 

 

 

 

REMARK: TOTAL CURRENT OF +5V AND +3.3V NOT EXCEED 40A

?TEMPERATURE RANGE: OPERATING 0? --- 40?, STORAGE –20? --- 70?
?HOLD UP TIME: 1.6 ms MINIMUM AT FULL LOAD & -48VDC INPUT VOLTAGE
?DIELECTRIC WITHSTANDING: INPUT/OUTPUT 1500 VAC FOR 1 MINUTE
INPUT TO FRAM GROUND 1500 VAC FOR 1 MINUTE
?EFFICIENCY: 68% TYPICAL, AT FULL LOAD
?POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
?OVER LOAD PROTECTION: 110 ~ 160% MAX
?OVER VOLTAGE PROTECTION:
+5V ? 5.7V ~ 6.5V, +3.3V ? 3.9V ~ 4.7V, 
+12V ? 13.3V ~ 14.3V
?OVER CURRENT PROTECTION: +5V?+12V?+3.3V 
?EMI: MEET FCC CLASS A, CISPR 22 CLASS A
?SAFETY: MEET UL 60950, CSA 60950, TUV EN-60950
?REMOTE ON / OFF CONTROL
THE POWER SUPPLY SHALL ACCEPT A LOGIC OPEN COLLECTOR LEVEL WHICH
WILL DISABLE/ENABLE ALL THE OUTPUT VOLTAGE (EXCLUDE +5V STAND BY)
AS LOGIC LEVEL IS LOW, OUTPUTS VOLTAGE WERE ENABLE
AS LOGIC LEVEL IS HIGH, OUTPUTS VOLTAGE WERE DISABLE
?COOLING: TWO 38 x 38 x 28mm DC FANS
?DC INLET IN EACH MODULE


*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.

Aucun commentaire n'a été publié pour le moment.

Donner votre avis

Alimentation Zippy 1 U DM1W4-6D50F?1350W?

Alimentation Zippy 1 U DM1W4-6D50F?1350W?

Dimension?340.00x422.00x43.00  (mm)

/ 13.40x16.60x1.70  (inch)

Input??VOLTAGE: DC –36 ~ -72V
?INPUT CURRENT: 40A (RMS) FOR -48 VDC
?INRUSH CURRENT: 20A MAX.

Donner votre avis